isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 500sdp1s2m6qea 2:1 1/7/2011 T521011 c bgl 1 1 pc mounting 6 3 2 5 14 2 3 1 1 4 4 5 6 c 19567 drawing update / clean-up 1/7/11 bgl pos. 1 pos. 2 pos. 3 switch function none on on 2-1, 5-4 n/a 2-3, 5-6 2 13 n 1.85 [.073 in] 12.70 [.500 in] 13.21 [.520 in] 3.81 [.150 in] 5 46 circuit: dpdt note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. contact rating: 5a @120vac or 28vdc, 2a @250vac 6. contact resistance: 10 milli-ohms max. 7. life expectancy: 30,000 make-and-break cycles at full load. 8. insulation resistance: 1,000 mega-ohm min. 9. dielectric strength: 1,000 v rms @sea level. 10. operating temp.: -30c to 85c 11. denotes critical parameter. 12. 2002/95/ec (rohs) compliant 3.18 [.125 in] 6.88 [.271 in] 1.17 [.046 in] 3.86 [.152 in] 13.57 [.534 in] 11.43 [.450 in] 1.27 [.050 in] 3.81 [.150 in] epoxy seal .36 [.014 in] 2.69 [.106 in] 12.70 [.500 in] rating 4.70 [.185 in] 13.21 [.520 in] .76 [.030 in] 2.16 [.085 in] 4.70 [.185 in] 6.10 [.240 in] 12.70 [.500 in]
|
